Vantage Pro 2 sensor install
 

I have a Vantage Pro 2 model 6152 and need to replace the
temperature/humidity sensor. I have one in hand (number 7346.029) but it
didn't come with any directions.

I've searched the web but can't find a manual/instructions for it. I
emailed Davis but have received no reply. Does anyone know how to
install this or have a link to a set of instructions?

TIA!!

..

--
We must change the way we live
Or the climate will do it for us.

Vantage Pro 2 sensor install
 

On Tue, 31 Mar 2009 11:42:55 -0230, clouddreamer
wrote:

I have a Vantage Pro 2 model 6152 and need to replace the
temperature/humidity sensor. I have one in hand (number 7346.029) but it
didn't come with any directions.

You didn't get instructions when you bought the original 6152?

Anyway -- you undo the 3 screws holding the radiation sheild off disconnect the
wires on top -- remove the plastic cap -- then slide the PC board out & replace.

Vantage Pro 2 sensor install
 

Joe Calls BS wrote:
On Tue, 31 Mar 2009 11:42:55 -0230, clouddreamer
wrote:

I have a Vantage Pro 2 model 6152 and need to replace the
temperature/humidity sensor. I have one in hand (number 7346.029) but it
didn't come with any directions.

You didn't get instructions when you bought the original 6152?

Anyway -- you undo the 3 screws holding the radiation sheild off disconnect the
wires on top -- remove the plastic cap -- then slide the PC board out & replace.


I bought the system more than 2 years ago and couldn't find the manual
anywhere. The online manual for it didn't specify how to replace it, but
now that I've done it, it was pretty straight forward...just awkward
getting up there to do it. You were spot on. The local dealer finally
got back to me and he was telling me to remove the white cover inside
the SIM module. D'oh!

Thanks!

..

--
We must change the way we live
Or the climate will do it for us.