Home |
Search |
Today's Posts |
![]() |
|
uk.sci.weather (UK Weather) (uk.sci.weather) For the discussion of daily weather events, chiefly affecting the UK and adjacent parts of Europe, both past and predicted. The discussion is open to all, but contributions on a practical scientific level are encouraged. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Hi, I get a reading when I tip the bucket manually, its set for mm.
However the readings are either non existant or very low when water is poured in at a very slow rate or when it raining. On the old Monitor you had to calibrate but there is no mention of this in the Vantage manual. Any ideas anyone? raymond |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Vantage Pro rain gauge repair | uk.sci.weather (UK Weather) | |||
Vantage Pro Problems | uk.sci.weather (UK Weather) | |||
Davis Vantage Pro - Rain gauge calibration | uk.sci.weather (UK Weather) | |||
Vantage Pro 2 Problems | uk.sci.weather (UK Weather) | |||
Davis Vantage Pro 2 weather stations | uk.sci.weather (UK Weather) |